LDH Series High Efficient Coulter Mixing Machine 6kw Uniform Quality 40-60kg Per Batch

The LDH-0.1 coulter mixing machine is a ploughshare-type powder mixer from the LDH series, engineered for plants that need efficient mixing and uniform quality at a practical scale. The machine operates on a well-established mixing principle: high-speed coulter (ploughshare) blades rotate close to the bottom wall of a horizontal cylindrical chamber, continuously lifting and throwing material into a fluidized state. This three-dimensional particle motion combines convective blending with high-intensity shear, which disperses fine powders, breaks up soft agglomerates and distributes trace additives evenly. With a batch capacity of 40-60 kg, an installed power of 6 kW and an equipment weight of 430 kg, the LDH-0.1 is a compact unit positioned between laboratory mixers and full-size production machines, serving pilot plants, small-batch lines and multi-formula workshops.

• LDH Series Coulter Mixing Technology: Ploughshare blades create a fluidized bed with strong shear and convective flow, giving short mixing cycles and complete dispersion.
• Efficient Mixing Cycle: Typical dry powder batches reach visual homogeneity in minutes; final cycle time is confirmed by our engineers against your specific recipe.
• Uniform Quality Batch After Batch: Repeatable three-dimensional particle movement keeps composition consistent from the first charge to the last.
• Compact Footprint: At 430 kg total weight the unit suits workshops with limited floor space and needs no special foundation for normal dry powder service.
• Low Energy Demand: The 6 kW installed power keeps per-kilogram operating cost low, an advantage for frequent small-batch production.
• Simple Changeover and Cleaning: Smooth internal surfaces and accessible discharge points limit material residue, reducing cross-contamination risk when switching formulas.
• Durable Mechanical Build: Heavy-duty steel body and wear-resistant coulter blades are selected for continuous industrial duty.

In day-to-day service, the LDH-0.1 is straightforward to run. Load the chamber with the dry components, start the blades and let the fluidized motion do the work; for most free-flowing powder blends the required cycle is short, and our engineers will define a recommended mixing time based on the bulk density and particle size of your materials. Keep the charge within the rated 40-60 kg range, because overloading reduces fluidization and extends cycle time. The machine should stand on a level floor with clearance below the discharge outlet, and the 6 kW supply should be connected by a qualified electrician following the wiring diagram supplied with the unit. Between batches, a simple wipe-down of the chamber interior and discharge area is normally enough to avoid carry-over; for stricter hygiene requirements, the accessible design allows more thorough cleaning. These operating habits come directly from field experience with similar LDH series installations and help users reach consistent results from the first week of production.

The LDH-0.1 coulter mixing machine is used across chemical, pharmaceutical, food, feed and building material industries for dry blending tasks. Typical duties include premixing active ingredients with excipients, homogenizing pigment and additive masterbatches, blending feed premixes and mineral supplements, mixing fertilizer and pesticide granules, and preparing detergent or seasoning powder formulations. The machine handles materials of different particle size and bulk density while maintaining uniform quality, so it fits both laboratory scale trials and small commercial production. Manufacturers running multiple products on one line benefit from the quick changeover between recipes.

Each LDH-0.1 coulter mixing machine is factory test-run before shipment to verify mixing performance, power consumption and safety interlocks, and the results are recorded in the quality inspection certificate that accompanies the machine. The unit is packed in an export-grade wooden case with protective wrapping, prepared for long-distance sea or air freight. Standard documentation includes the operation manual, wiring diagram and inspection certificate. Our after-sales team offers online technical guidance for installation, commissioning and troubleshooting, and spare wear parts are kept available for quick replacement. We supply honest, verifiable information: if your material requires special handling or a different configuration, we will tell you before you order rather than after.

To receive a recommendation matched to your material properties and required batch size, please contact us with your powder type, bulk density and target output. We will respond with the suitable LDH series configuration, cycle estimate and delivery details.