The WZ-0.1 double shaft paddle mixer is a 0.1 cubic metre horizontal blender built for fine chemical workshops that run many short campaigns in different colours and grades. Its two shafts are mounted side by side and driven in opposite directions at matched speed, while the staggered paddles generate simultaneous radial, circumferential and axial movement. Because all three directions act at once, the mixture follows a compound loop instead of a single circular path, and even strongly contrasting pigments merge into a single shade without streaks.
The frame accepts a 40 to 60 kilogram working charge and runs on a 3 kW motor, which makes it the natural step between laboratory trials and full production. The discharge is electrically driven so that operators can empty the trough from the control side without reaching under the machine, and the cover is fitted with an atomising nozzle for liquid colourant, binder or anti-caking agent. Stainless contact surfaces and a smooth internal finish allow fast dry cleaning between colour changes.
Key Features| Parameter | Specification |
|---|---|
| Model | WZ-0.1 |
| Total Volume | 0.1 m3 |
| Working Batch | 40-60 kg per batch |
| Drive Power | 3 kW |
| Shaft Arrangement | Two parallel shafts, equal speed counter-rotating |
| Paddle Type | Angled compound paddles, staggered layout |
| Discharge | Electric valve |
| Contact Material | SUS304 / SUS316L |
| Machine Weight | 360 kg |
The two shafts sit parallel inside the horizontal trough and turn towards each other, so material at the wall is lifted and thrown into the centre while material in the centre is displaced outward and upward. The paddles are set at compound angles, which adds an axial component that moves the charge from the inlet end towards the outlet end and back. The result is a turbulent, fluidised bed in the upper zone and a gentle convective roll below it, a combination that mixes fast without generating the frictional heat that would damage heat sensitive pigments.
ApplicationsThis model is used for pigment and dye blends, toner and masterbatch colouring, pesticide wettable powders, ceramic glaze frits, cosmetic powders, small volume resin additives and speciality chemical compounds. Workshops that produce several tints per shift value the electric discharge and the quick clean down, while formulators appreciate that a 40 to 60 kilogram batch is large enough to be commercially meaningful yet small enough to test a new colour on real equipment.
Packaging & Quality AssuranceThe blender leaves the workshop wrapped in stretch film and mounted on a timber skid, then enclosed in a plywood case with internal bracing for container shipment. Delivery includes the operation manual, electrical schematic, tool kit and a spare shaft seal. A twelve month warranty covers the trough, shafts, paddles and drive train, and commissioning support is provided by video call, with on-site service quoted separately.