The WZ-3 zero gravity mixer is a three cubic metre production blender designed for abrasive mineral powders where both blending accuracy and wear life decide the cost per tonne. Two parallel shafts counter-rotate at matched speed, and the staggered paddles accelerate the bed until it behaves as a fluid, momentarily overcoming gravity. Because the charge moves as a single body in three directions, filler particles of very different hardness and density are recombined continuously instead of settling into layers.
With a working charge of 1200 to 1800 kilograms and an 18.5 to 22 kW drive, the unit suits plants that run long campaigns on one formulation and demand repeatable quality from the first bag to the last. Paddle faces can be fitted with wear resistant overlays for glass silicon, quartz and plastic granule work, the trough is sealed for dust control, and the discharge gate is pneumatically operated so that a full tonne and a half batch leaves the machine quickly.
Key Features| Parameter | Specification |
|---|---|
| Model | WZ-3 |
| Total Volume | 3 m3 |
| Working Batch | 1200-1800 kg per batch |
| Drive Power | 18.5-22 kW |
| Shaft Arrangement | Two parallel shafts, equal speed counter-rotating |
| Paddle Type | Angled compound paddles, staggered layout |
| Discharge | Pneumatic valve |
| Contact Material | SUS304 with wear resistant overlays |
| Machine Weight | 3800 kg |
Abrasive mineral powders grind away at any surface that slides against them, so the mixing action must move material quickly with as little scraping as possible. In this design the paddles are set at a compound angle that lifts the bed into a fluidised state above the shaft line, where particles travel with the blade rather than against it. Below that zone a slower convective roll carries material along the trough floor and up the walls, and the two layers exchange continuously. The result is fast homogenisation with reduced relative velocity at the wear surfaces, which measurably extends paddle life.
ApplicationsThe WZ-3 serves glass and ceramic raw material preparation, quartz and silica flour blending, plastic compound and masterbatch premixing, mineral filler production, refractory batch mixing, foundry facing sand preparation and abrasive product compounding. Plants processing thousands of tonnes a year use this frame because it combines a large batch size with a dust tight, wear protected build that survives continuous contact with hard particulate.
Packaging & Quality AssuranceThe blender is film wrapped, fixed to a heavy timber skid and shipped in a braced plywood case with the control panel packed separately. Documentation includes the operation manual, electrical and pneumatic schematics, wear plate replacement instructions and a recommended spares list. A twelve month warranty applies to the trough, shafting, paddles and drive train, with wear parts quoted separately and remote commissioning support included.