The WZ-0.5 twin shaft paddle mixer is a 0.5 cubic metre horizontal blender aimed at coating and putty producers who need a dependable mid size unit. Two shafts run in opposite directions at equal speed, and the staggered paddles create radial, circumferential and axial motion at once, so the charge circulates as a compound loop rather than a flat ring. Heavy mineral fillers, resin powder and lightweight additives are therefore recombined many times per cycle, which suppresses the density stratification that spoils single axis blenders.
A 200 to 300 kilogram working batch and a 5.5 to 7.5 kW drive make this model suitable for one or two production shifts per day at a small to medium plant. The cover carries an atomising nozzle for liquid additive, and the pneumatic outlet discharges into a screw conveyor or packing hopper. Internals are finished in stainless steel with radiused corners, so putty paste residue and resin build up can be removed quickly when the formulation changes.
Key Features| Parameter | Specification |
|---|---|
| Model | WZ-0.5 |
| Total Volume | 0.5 m3 |
| Working Batch | 200-300 kg per batch |
| Drive Power | 5.5-7.5 kW |
| Shaft Arrangement | Two parallel shafts, equal speed counter-rotating |
| Paddle Type | Angled compound paddles, staggered layout |
| Discharge | Pneumatic valve |
| Contact Material | SUS304 / SUS316L |
| Machine Weight | 880 kg |
Material enters the trough through the top cover and is immediately caught by the two inward turning paddle sets. The lower blades lift powder from the floor and drive it up the centre, the upper blades sweep it outward and down the walls, and the angled faces push it lengthwise along the shaft. Because the two shaft streams meet in the middle and are reflected back, the product is repeatedly torn apart and recombined, which is far more efficient than simply rotating the whole mass. Complete homogeneity normally arrives within two to three minutes, and the batch can be discharged without waiting for the bed to settle.
ApplicationsTypical duties include wall putty and skim coat powders, tile adhesive and grout, epoxy and polyester resin compounds, powder coatings, glass frit blends, refractory mixes and ceramic body preparations. Producers of construction chemicals especially appreciate the model because fillers with very different bulk densities must be held in suspension through the mixing cycle, and downstream bagging tolerates no variation from bag to bag.
Packaging & Quality AssuranceThe unit is shipped film wrapped on a timber skid inside a braced plywood case, with the control box and pneumatic valves protected separately. Documentation covers the operation manual, electrical and pneumatic schematics, spare gaskets and a nozzle maintenance guide. A twelve month warranty applies to the trough, shafts, paddles and drive train, and video commissioning support is included in the price of every machine.