The WZ-2 double shaft paddle mixer handles the aggressive side of powder processing: fertilizer blends, pesticide wettable powders, concrete admixtures and other mineral formulations that attack ordinary carbon steel and settle quickly when agitation stops. Its two shafts turn towards each other at equal speed, and the staggered blades drive material radially, circumferentially and axially at once, creating a compound circulation that keeps heavy and light fractions together throughout the cycle instead of letting them separate by density.
A working charge of 800 to 1200 kilograms and a 15 to 18.5 kW drive put this model in the mid production range, where a single batch fills several bags and cycle time directly affects daily output. The discharge is pneumatically actuated for fast clearing, the trough is sealed against dust, and the wetted parts can be supplied with anti corrosion coating or stainless steel to resist chloride and acid bearing formulations. The cover accepts spray nozzles for binder or anti caking solutions.
Key Features| Parameter | Specification |
|---|---|
| Model | WZ-2 |
| Total Volume | 2 m3 |
| Working Batch | 800-1200 kg per batch |
| Drive Power | 15-18.5 kW |
| Shaft Arrangement | Two parallel shafts, equal speed counter-rotating |
| Paddle Type | Angled compound paddles, staggered layout |
| Discharge | Pneumatic valve |
| Contact Material | Epoxy coated carbon steel / SUS304 |
| Machine Weight | 2740 kg |
Fertilizer and mineral blends contain fractions whose bulk densities differ by a factor of two or more, and any mixer that simply rotates the mass will allow the dense fraction to sink. Here the two paddle sets work against that tendency: the lower blades lift the heavy material from the floor and drive it up the centre, while the upper blades push the lighter fraction down the walls, so both streams are forced through each other. The axial rake on the paddles then transports the charge along the trough and back, and the repeated collision of the two streams averages out differences in size, density and colour within a two to three minute cycle.
ApplicationsThis model is used for NPK and blended fertilizer, micronutrient and trace element premixes, pesticide wettable powders and granules, concrete and mortar admixtures, refractory castables, foundry sand additives and mineral filler compounds. Plants that handle several formulations in a week value the sealed trough and anti corrosion finish, because aggressive residues can be washed out between campaigns without damaging the internal surfaces.
Packaging & Quality AssuranceEach blender is wrapped in film, secured on a timber skid and shipped inside a braced plywood case with desiccant for humid destinations. The package includes the operation manual, electrical and pneumatic drawings, spare cover gaskets and a touch up kit for the coating. A twelve month warranty covers the trough, shafting, paddles and drive train, with remote technical support for installation and an optional on-site commissioning service.