The WZ-0.3 zero gravity mixer takes its name from the state it creates inside the trough: the paddles accelerate the powder bed so quickly that the material behaves as a fluid and briefly loses the settling effect of gravity. Two shafts turn in opposite directions at equal speed, and the angled blades drive the charge radially outward, circumferentially around the shaft line and axially along the trough. The three motions interlock into a compound circulation, so detergent base powder, builders, enzymes and perfume carriers reach a uniform blend far faster than in a ribbon or rotary drum machine.
This frame holds a 120 to 180 kilogram working charge and uses a 4 to 5.5 kW drive, placing it at the entry point of commercial detergent production. The outlet is pneumatically actuated for fast, repeatable emptying into a filling hopper, and the trough is sealed so that fine zeolite and sulphate dust stays inside the machine. An optional atomising header on the cover allows perfume or non-ionic surfactant to be sprayed directly onto the moving powder bed.
Key Features| Parameter | Specification |
|---|---|
| Model | WZ-0.3 |
| Total Volume | 0.3 m3 |
| Working Batch | 120-180 kg per batch |
| Drive Power | 4-5.5 kW |
| Shaft Arrangement | Two parallel shafts, equal speed counter-rotating |
| Paddle Type | Angled compound paddles, staggered layout |
| Discharge | Pneumatic valve |
| Contact Material | SUS304 / SUS316L |
| Machine Weight | 750 kg |
During operation the lower paddles sweep powder from the trough floor and throw it upwards along the centre line, while the upper paddles push material outward towards the walls. Because both shafts turn towards the middle, the two streams collide and recombine continuously, and the product is repeatedly transferred between the fluidised upper zone and the denser lower roll. This exchange happens many times per minute, so differences in particle size, bulk density and colour are averaged out rather than sorted by gravity, which is precisely the problem a zero gravity design is intended to solve.
ApplicationsThe WZ-0.3 is widely used for washing powder and detergent base blends, soap powder, scouring compounds, dishwasher powders and other household chemical products. It also suits dry mortar additives, tile adhesive premixes, wall putty compounds and small volume agricultural formulations. Producers who combine several low dosage actives with a bulky carrier rely on the aggressive convective flow of this model to distribute those minor ingredients evenly enough for reliable dosing and consistent end product performance.
Packaging & Quality AssuranceEvery machine is film wrapped, bolted to a timber base and crated in plywood with moisture barrier lining for ocean transport. The shipment includes the operation manual, pneumatic circuit diagram, solenoid valve spares and a full set of cover gaskets. The trough, shafts, paddle assemblies and drive components are covered by a twelve month warranty, and our engineers provide remote guidance for installation, air line connection and first production runs.