logo

WZ-0.05 2.2kW 24-30kg Batch Twin Paddle Mixer Lab Powder Blender For Micro Ingredient Trials

1 Set
MOQ
WZ-0.05 2.2kW 24-30kg Batch Twin Paddle Mixer Lab Powder Blender For Micro Ingredient Trials
Features Gallery Product Description Request A Quote
Features
Specifications
Total Volume: 0.05 M3
Working Batch: 24-30 Kg
Drive Power: 2.2 KW
Shaft Configuration: Twin Counter-rotating Shafts
Discharge Mode: Manual Gate
Contact Material: SUS304 / SUS316L
Machine Weight: 250 Kg
Application: Laboratory And Pilot Scale Powder Blending
Highlight:

2.2kW Twin Paddle Mixer

,

24-30kg Twin Paddle Mixer

,

Micro Ingredient Trials zero gravity mixer

Basic Infomation
Place of Origin: Changzhou, Jiangsu, China
Model Number: WZ-0.05
Payment & Shipping Terms
Packaging Details: Plywood Case
Delivery Time: 30-45 Days
Payment Terms: T/T,L/C
Supply Ability: 30 Sets per Month
Product Description

The WZ-0.05 twin paddle mixer is a compact horizontal blender engineered for formula development work where batch size is measured in grams and kilograms rather than tonnes. Two parallel shafts rotate in opposite directions at identical speed inside a horizontal trough, and the paddles are positioned so that every particle is pushed radially, circumferentially and axially at the same time. The three directions combine into a compound circulation that lifts material from the trough floor, folds it back over the shaft line and returns it along the side walls, so a full charge reaches a homogeneous state in a very short cycle.

With a total volume of 0.05 cubic metres, a working batch of 24 to 30 kilograms and a 2.2 kW drive, this smallest frame in the WZ family is intended for laboratories, pilot plants and small batch workshops that must validate a recipe before scaling up. The discharge gate is operated manually for quick cleaning between trials, and every product contact surface is stainless steel so that pigments, flavours and active ingredients leave no residue behind.

Key Features
  • Rapid homogeneous blending: the compound three directional flow equalises colour and particle distribution within a one to two minute cycle, dramatically shortening laboratory trials.
  • Low installed power: a 2.2 kW motor drives a 24 to 30 kilogram charge, keeping energy cost per trial negligible for laboratories working on tight budgets.
  • Manual discharge gate: the hand operated outlet empties the trough in a controlled stream and opens fully for cleaning when the recipe changes.
  • Full stainless contact: SUS304 is the standard wetted material, and SUS316L is available when corrosive or pharmaceutical grade powders are involved.
  • Sealed operation: the gasketed cover retains fine dust and keeps the working environment clean while protecting blend accuracy from external contamination.
  • Liquid addition ready: the cover port accepts an atomising nozzle so that small volumes of binder or flavour can be sprayed onto the powder bed during the cycle.
Technical Specifications
ParameterSpecification
ModelWZ-0.05
Total Volume0.05 m3
Working Batch24-30 kg per batch
Drive Power2.2 kW
Shaft ArrangementTwo parallel shafts, equal speed counter-rotating
Paddle TypeAngled compound paddles, staggered layout
DischargeManual gate
Contact MaterialSUS304 / SUS316L
Machine Weight250 kg
Mixing Principle

Inside the horizontal trough the two shafts turn at equal speed in opposite directions. Each shaft carries a set of angled paddles arranged in a staggered pattern; as the blades sweep the trough they create a fluidised zone above the shaft line where gravity is momentarily overcome, which is why this family is also known as a zero gravity mixer. Material in that zone is thrown into the centre, replaced by material rising from the bottom, and the continuous exchange leaves no dead corner, no stratification band and no segregated fine fraction at the walls.

Applications

The WZ-0.05 serves formulators working with flavouring compounds, vitamin and mineral premises, pigment masterbatches, cosmetic colour blends, pharmaceutical placebos and small volume speciality chemicals. It is equally useful for quality control departments that must reproduce a customer sample exactly, and for universities and test kitchens that need repeatable small batches before a production line is ordered.

Packaging & Quality Assurance

Each unit is wrapped in protective film, fixed on a timber pallet and shipped in a fumigated plywood case that withstands long sea freight. A test report, wiring diagram, operation manual and spare seal set travel with the machine. The trough, shafts, paddles and bearing housings carry a twelve month warranty against manufacturing defects, and remote video support is available for installation and first commissioning.

Recommended Products
Get in touch with us
Contact Person : Mrs. Maize
Tel : +86 13861842102
Characters Remaining(20/3000)